View MKT050102A101_715055.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Sharma Film Capacitors
FILM
Quick Reference Guide
Series
(Former Series)
CAPACITORS
Style
Dielectric/ Construction Metallized Polyester Molded can Metallized Polyester Molded can Metallized Polyester Molded can Metallized Polyester Epoxy molded Metallized Polyester Epoxy dipped Metallized Polyester Epoxy dipped
Lead Spacing millimeters / (inches) 5.0 (0.200")
Capacitance Range Voltage Range 0.001 F to 1.0 F 50 VDC to 400 VDC 0.033 F to 0.33 F 100 VDC to 630 VDC 0.001 F to 6.8 F 100 VDC to 1000 VDC
PLASTIC FILMS USED IN CAPACITORS The capacitance value of a capacitor depends on the area of the dielectric separating the two conductors, its thickness and the dielectric constant. Other properties of the film such as the temperature coefficient, the dissipation factor, the voltage handling capabilities, its suitability to be metallized etc. also influence the choice of the dielectric. POLYESTER FILM
MKT 050 (MKT1.85) MKT 075 (MKT1.67) MKT 100 (MKT1.60)
7.5 (0.300")
10.0 (0.400"), 15.0 (0.600"), 22.5 (0.886"), 27.5 (1.083")
MKT 00S (SMX) MKT D01 (MPD-1)
Surface Mount
0.01 F to 0.22 F 50 VDC to 630 VDC 0.001 F to 6.8 F 100 VDC to 630VDC
10.0 (0.400"), 15.0 (0.600"), 22.5 (0.886"), 27.5 (1.083")
MKT D02 (MPD-2)
10.0 (0.400"), 15.0 (0.600"), 17.5 (0.689"), 25.0 (0.984") 27.5 (1.083")
0.01 F to 3.9 F 100 VDC to 630VDC
MKT D03 (MPD-3)
Metallized Polyester Epoxy dipped
10.0 (0.400"), 15.0 (0.600"), 17.5 (0.689"), 25.0 (0.984") 27.5 (1.083")
0.01 F to 3.9 F 100 VDC to 630VDC
MKTR (MPR) MKTO (MPO)
Metallized Polyester Tape wrapped Metallized Polyester Tape wrapped
Rounded Axial
0.01 F to 6.8 F 63 VDC to 630 VDC 0.01 F to 6.8 F 63 VDC to 630 VDC
Oval Axial
This film has a relatively high dielectric constant which makes it suitable for designs of a capacitor with high volumetric efficiency. It also has high temperature stability, high voltage and pulse handling capabilities and can be produced in very low thickness. It can also be metallized. Polyester is a popular dielectric for plain film capacitors as well as metallized film capacitors.
POLYPROPYLENE FILM The dielectric constant of polypropylene is slightly higher than that of polyester which makes the capacitors relatively bigger in size. This film has a low dissipation factor and excellent voltage and pulse handling capabilities together with a low and negative temperature coefficient which is an ideal characteristic for many designs. Polypropylene has the capability to be metallized. POLYSTYRENE FILM The dielectric constant of Polystyrene is relatively lower resulting in larger physical size of capacitors. Though the temperature handling capability of this film is lower than that of the other films, it is extremely stable within the range. Its low dissipation factor and the negative, near linear temperature coefficient characteristics make it the ideal dielectric for precision capacitors. Polystyrene cannot be metallized.
Cross Reference Guide
SHARMA (former series) Arcotronics Evox MEPCO* Philips Roederstein Siemens Thompson Wima MKT 050 MKT1.85 R.85 MMK 5 712A 1 370 MKT1817 B32529 IRD/MC MKS 2 MKT 075 MKT1.67 R.66 MMK 719A 1 371 MKT1818 B32520/30 IRD/MC MKS 3 MKT 100 MKT1.60 R.60 MMK 719A 1 372 & 373 MKT1822 B32521/31 IRD/MC MKS 4 MKT 00S SMX LDA MKT1824 SMD 7.3 MKT D01 MPD-1 712A 1 367 to 369 5140 to 44 MD MKT D02 MPD-2 712A 1 366 to 369 5140 to 44 MD MKT D03 MPD-3 712A 1 367 to 369 5140 to 44 MD MKTR MPR MKT1813 MKTO MPO -
* MEPCO SERIES ARE BEING REPLACED WITH PHILIPS SERIES AS LISTED IN THE TABLE. BOTH SERIES ARE LISTED FOR YOUR CONVENIENCE.
Sharma Film Capacitors
Ordering/Part Numbering
Example below indicates: MKT100 Series, 0.1F, 5% Tol., 100 Volts, Bulk.
(EXAMPLE)
M
K
T
1
0
0
1
0
4
J
1
0
1
RH
Series Enter Series Code: (Up to 6 Digits) MKT050, MKT075, MKT100, MKT00S, MKTD01, MKTD02, MKTD03, MKTR, MKTO.
RoHS Compliant
Capacitance Enter EIA Capacitance Code: (3 Digits) First Two Digits Represent Significant Figures of Capacitance in Picofarads. Third Digit Indicates Number of Zeros Example: 1000pF = 102 0.01uF = 103 Tolerance Enter Capacitance Tolerance Code: (1 Digit) Tolerance SPCL 1% 2% 3% Code A F G L Rated Voltage Enter Voltage Code: (3 Digits) First Two Digits Represent Significant Figures of DC Voltage unless individual data sheet specifies Only AC Rating. Third Digit Indicates Number of Zeros Example: 50V DC = 500 250V DC = 251 Product Packaging Code Standard for Film Capacitors is Bulk packing. No Packaging Code Required for Bulk Style. For other packaging styles, Enter packaging code listed below. (1 Digit) Packaging Code T A ( no code) Packaging Style Tape / Reel Ammo Bulk 5% J 6% H 10% 20% K M
Part Marking
BOX TYPE The Capacitance value is marked in F together with the Tolerance code and the DC Voltage Figures on the top surface of the capacitors. The MKT 100 capacitance is also marked in Nano Farads with "n" representing the decimal point in the capacitance value. The SAHA logo and series codes, MKT100, MKP 100, KP300 etc., or their former series designations, are marked on the side. MKT100 series is supplied in certain cases, without series code marking. SAHA logo may be replaced with marking, "SH" or "S" depending upon the limitations of space. 2.2J250 OTHER TYPES All other types of capacitors such as tape wrapped axial, tape wrapped radial, vertical box type etc.,. are also marked on the body of the capacitor with the similar information in one of the combinations, as explained above. In addition, in certain cases, the outer foil side is also indicated with a dot or ring. DIPPED TYPE The Capacitance value is marked in F along with the Tolerance code and the DC Voltage 2.2K250 Figures on the side of the capacitors. The capacitance is also marked in Capacitance code with the first two digits representing the significant digits followed by one digit representing the number of zeros. The SAHA logo may be replaced with marking, "SH", "S" or no brand marking depending on the limitation of space.
Sharma Film Capacitors
PERFORMANCE CHARACTERISTICS
ELECTRICAL - BASIC PARAMETERS
1.1 RATED CAPACITANCE The nominal or rated value of capacitance is measured at 25 C in an measuring bridge with 1K Hz source, free of harmonics. Please refer to relevant series for the range of capacitance value covered. Capacitance is frequency and temperature dependent. The variation pattern of capacitance with temperature and frequency is explained in sections 2.1 and 2.2. 1.2 CAPACITANCE TOLERANCE The permitted variation of actual value from the nominal value is termed the tolerance. The tolerance is expressed in percentage. The standard tolerances for plastic film capacitors are 5% (J), 10% (K) and 20% (M). 1.3 RATED VOLTAGE The voltage at which the capacitor can operate continuously up to a temperature of 85 C (unless otherwise specified) is the rated voltage. As this is a critical parameter for choosing a capacitor, the case sizes are listed in a matrix of capacitance value and rated voltage. 1.4 CATEGORY VOLTAGE The maximum voltage that may be applied continuously over the temperature range is termed the category voltage. This is same as the rated voltage up to 85 C unless otherwise specified in the climactic category of the product. Above 85 C a derating has to be applied depending upon the dielectric. 1.5 OPERATING TEMPERATURE This is the temperature range with in which the capacitor can function as specified in the climactic category. Please refer to relevant sections for derating above the temperature at which the full rated voltage can be applied. 1.6 DISSIPATION FACTOR This is the measurement of tangent of loss angle (tan d) and is expressed as a percentage. Measurement of dissipation factor is carried out at 1 K Hz. or 10 K Hz. as specified in the data sheet of the relevant series at 25 C. Dissipation factor is temperature and frequency dependent. The nature of variation of dissipation factor with temperature and frequency for different dielectric are explained in Figures 2.3A to 2.3C and 2.4A to 2.4C. 1.7 INSULATION RESISTANCE Insulation Resistance is the electrical resistance offered by the capacitor. The Insulation Resistance is measured directly in Mega Ohms where as for higher capacitance values it is expressed in seconds as the product of M Ohm and F. 1.8 PULSE RISE TIME The pulse rise time or dv/dt rating is the capability of the capacitor to handle rapid changes in voltage or pulse. This is expressed in terms of Volts per seconds. The dv/ dt rating of a capacitor depends upon the dielectric as well as the design and construction of the capacitors. The dv/dt values of different types of capacitors are listed in the corresponding data sheets of the capacitors.
Polypropylene Capacitance Change Vs. Temperature
Figure 2.1A
Polystyrene Capacitance Change Vs. Temperature
Figure 2.1B
Polyester Capacitance Change Vs. Temperature
Figure 2.1C
Figure 2.2A
ELECTRICAL - EFFECTS AND RELATIONS
2.1 TEMPERATURE DEPENDENCE OF CAPACITANCE Capacitance of plastic film capacitors vary with temperature. However the pattern of variation is different for different plastic film dielectrics such as Polystyrene, Polyester and Polypropylene. The The variation patterns for these dielectrics are shown in figure 2.1A, 2.1B and 2.1C. The rate of change of capacitance with temperature is termed the Temperature Coefficient. The nominal values of temperature coefficient for different dielectrics are shown below.
DIELECTRICS TEMPERATURE COEFFICIENT POLYSTYRENE -150 ppm POLYESTER +400 ppm POLYPROPYLENE -200 ppm
Polystyrene Capacitance Change Vs. Frequency
2.2 FREQUENCY DEPENDENCE OF CAPACITANCE Capacitance reduces with increase in frequency. The variation pattern for different dielectrics are shown in figure 2.2A, 2.2B and 2.2C. 2.3 TEMPERATURE DEPENDENCE OF DISSIPATION FACTOR The dissipation factor varies with temperature. Each dielectric follows a unique variation pattern. The variation pattern for different dielectrics are shown in figure 2.3A, 2.3B and 2.3C.
Figure 2.2C
Figure 2.2B
Polypropylene Capacitance Change Vs. Frequency
Polyester Capacitance Change Vs. Frequency
Sharma Film Capacitors
Figure 2.3A
Figure 2.4A 2.4 FREQUENCY DEPENDENCE OF DISSIPATION FACTOR Dissipation factor increased with frequency. The variation pattern is different for different dielectrics. The typical variation pattern for different dielectrics are shown in fig. 2.4A, 2.4B and 2.4C. 2.5 TEMPERATURE DEPENDENCE OF INSULATION RESISTANCE The insulation resistance of the dielectric varies with temperature. The variation pattern is different fro different dielectric films. The typical variation pattern for different dielectrics are shown in figure 2.5A, 2.5B and 2.5C.
Polystyrene Dissipation Factor Vs. Temperature
Polystyrene Dissipation Factor Vs. Frequency
Figure 2.3B
Figure 2.4B
ELECTRICAL - AC APPLICATIONS When a capacitor is connected to alternating voltage its electrodes are alternately charged positive and negative. The charge alternates with a rhythm of double the frequency of the alternating voltage. Thus there is alternating current flowing in the leads of the capacitor.
3.1 ACROSS THE LINE APPLICATIONS In this application the capacitor is connected between the lines, ie, between the main phase and neutral line terminals. In this type of application, failure of capacitor due to short circuit will not result in an electric shock. The capacitors rated for normal across the line applications are termed class-X2 capacitors. 3.2 BETWEEN LINE AND GROUND APPLICATIONS In this type of application the capacitors are connected between the line and the ground, ie, between the phase terminal and the body. In this application, failure of the capacitor due to short circuit could possibly expose somebody touching the appliance to an electric shock. The capacitors rated for this application are termed classY capacitors.
Polypropylene Dissipation Factor Vs. Temperature Polypropylene Dissipation Factor Vs. Frequency
Polyester Dissipation Factor Vs. Temperature
Polyester Dissipation Factor Vs. Frequency
Figure 2.3C
Figure 2.4C
MECHANICAL CHARACTERISTICS
Figure 2.5A Figure 2.5B 4.1 RESISTANCE TO SOLVENTS The encapsulation technics adopted in the manufacture of plastic film capacitors ensure resistance to a wide range of solvents and cleaning liquids. The epoxy end sealed boxed capacitors can stand Trichloro trifluorethane, Methanol, Ethanol, Isopropanol and Aqueous cleaning solvents. 4.2 SOLDERABILITY A minimum of 3/4 of the circumferential surface of the terminations will be covered with new solder when dipped in molten solder bath at 230 C for 2 1 sec. after immersing in methanol - rosin solution at room temperature for 5 to 10 seconds.
Polystyrene Insulation Resistance Vs. Temperature
Polyester Insulation Resistance Vs. Temperature
Figure 2.5C 4.3 TERMINAL STRENGTH The leads are made of tinned copper wire. The terminals are capable of withstanding an axial load of 2.25 Kgs(5 lbs).
ENVIRONMENTAL
RESISTANCE TO HUMIDITY The capacitor samples will be exposed to 93 2 C for 56 days at 40 2 C. After the test the capacitance change shall be within 3% of the original value, The insulation resistance shall be within 50% of the initial limits and the dissipation factor shall remain within the initial specifications.
Polypropylene Insulation Resistance Vs. Temperature
Sharma Film Capacitors
MKT 050
SERIES Formerly MKT 1.85 series INTRODUCTION The MKT 050 Series Metallized Polyester Film Capacitors are miniature capacitors with 5 mm lead spacing. This series covers a wide range of values and voltages and exhibit excellent high frequency characteristics. In addition to specific applications such as Blocking, Bypassing and Coupling, this series is widely used in all General Purpose applications. FEATURES value and Voltage * Wide miniature size range * Ultra retardant case and potting * Flame dimensions and surface finish due to molded case construction * Consistentin tape & reel form for automatic insertion * Available capability * Self healing GENERAL SPECIFICATIONS: Dissipation factor: For capacitance 0.1 F = 0.010 max at 1 KHz, 0.015 max at 10 KHz, 0.030 max at 100 KHz. For capacitance > 0.1 F = 0.0010 max at 1 KHz, 0.0015 max at 10 KHz. Insulation resistance: For nominal voltage < 100 V DC; 10,000 M Ohms for C 0.10 F, 1,000 seconds for C > 0.10 F. For nominal voltage 100 V DC; 30,000 M Ohms for C 0.10 F, 1,000 seconds for C> 0.10 F at a temperature of 25 5 C. Capacitance tolerance: 5%(J), 10%(K) and 20%(M) Voltage Test: 1.6 times the rated voltage applied between terminals for 2 seconds at a temperature of 25 5 C Temperature range: -55 to 100 C with derating above 85 C Climatic category: F M D LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test: 1. Capacitance change shall remain within 5%. 2. Dissipation Factor shall be within 1.5 times the original limits. 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. DIMENSIONS AND TOLERANCES: "d"= 0.5 to 0.6mm (0.020 to 0.024") for dimension "T" 3.5mm (0.138") "d"=0.6 mm (0.024") for dimension "T" >3.5mm (0.138") "LL'' = 4.0 +1.5mm (0.16 +0.06") for Bulk Supply PULSE RISE TIME (dv/dt) Volts per sec.
RATED VOLTAGE 50 63 100 100 100 250 400 Capacitance RangeF 0.001-1.0 0.001-1.0 >0.0068 0.0033-0.0068 >0.0033 0.001-1.0 0.001-1.0 dv/dt
value
4 8 10 15 30 20 40
Taping Dimensions for MKT 050 Series (5mm Pitch)
DESCRIPTION d Lead wire dia. P Tapingpitch P0 Sprocketholepitch P1 Centering of lead wire P2 Centering of the body p Lead spacing dS Component alignment H Height from Sproket Center to component body W Tape width W 0 Width of adhesive tape W 1 Sprocket hole alignment D0 Positionholediameter t Tape thickness DIMENSION TOLERANCES mm Inches mm Inches 0.5 to 0.6 0.020 to 0.024 0.05 0.002 12.7 0.500 1 0.039 12.7 0.500 0.2 0.008 3.85 0.152 0.7 0.028 6.35 0.250 1.3 0.051 5 0.197 +0.6/ -1.1 +0.024/ -0.043 0 0.000 2 0.079 16.0, 16.5 0.630, 0.650 0.5 0.020 or 18.5 or 0.728 18 0.709 +1.0/ -0.5 +0.039/ -0.020 6 min. 0.236 min. 9 0.354 0.5 0.020 4 0.157 0.2 0.008 0.7 0.028 0.2 0.008
Packaging Specifications
Bulk, Tape/Reel & Ammo Pack
BOX SIZE TxHxL 2.5 x 6.5 x 7.2 3.0 x 6.5 x 7.2 3.5 x 7.5 x 7.2 4.5 x 9.5 x 7.2 5.0 x 10.0 x 7.2 6.0 x 11.0 x 7.2 7.2 x 13.0 x 7.2 BULK CARTON 3000 3000 2000 1500 1000 2000 1500 TAPED REEL PACK AMMO PACK 2500 3500 2100 2900 1800 2500 1400 1900 1200 NA 1000 NA 800 NA
Sharma Film Capacitors
MKT 050
Case Dimensions in Millimeters 50V * 63V * 100V * 250V * 400V
SERIES CASE DIMENSIONS
Voltage
Cap Value in F 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0
50 V DC / 30 V AC
Dimensions in MM L H T S
63 V DC / 40 V AC
Dimensions in MM L H T S
100 V DC / 63 V AC
Dimensions in MM L 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 H 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 7.5 9.5 10.0 11.0 T 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.0 3.5 4.5 5.0 6.0 S 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0
250 V DC / 160 V AC
DIMENSIONS IN MM L H T S
400 V DC / 200 V AC
DIMENSIONS IN MM L 7.2 7.2 7.2 7.2 7.2 H 6.5 6.5 6.5 6.5 6.5 6.5 7.5 9.5 9.5 10.0 11.0 T 2.5 2.5 2.5 2.5 2.5 3.0 3.5 4.5 4.5 5.0 6.0 S 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0
7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2
6.5 6.5 6.5 6.5 7.5 9.5 9.5 11.0 13.0 13.0
2.5 2.5 2.5 3.0 3.5 4.5 4.5 6.0 7.2 7.2
5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0
7.2 7.2 7.2 7.2 7.2 7.2
7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 6.5 6.5 7.5 7.5 9.5 10.0 11.0 2.5 3.0 3.5 3.5 4.5 5.0 6.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.2 7.2 7.2 7.2 7.2 7.2
6.5 6.5 6.5 7.5 7.5 9.5 10.0 11.0
2.5 2.5 2.5 3.5 3.5 4.5 5.0 6.0
5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0
7.2 7.2 7.2 7.2 7.2
Case Dimensions in Inches 50V * 63V * 100V * 250V * 400V
Voltage
Cap Value in F 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0
50 V DC / 30 V AC
DimensionsinInches L H T S
63 V DC / 40 V AC
DimensionsinInches L H T S
100 V DC / 63 V AC
DimensionsinInches L H T S 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197
250 V DC / 160 V AC
DimensionsinInches L H T S
400 V DC / 200 V AC
DimensionsinInches L H T S 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197
0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.118 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.295 0.138 0.197 0.283 0.256 0.098 0.197 0.283 0.256 0.098 0.197 0.283 0.374 0.177 0.197 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.256 0.256 0.256 0.295 0.374 0.394 0.433 0.098 0.098 0.118 0.138 0.177 0.197 0.236 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.256 0.295 0.374 0.374 0.433 0.512 0.512 0.118 0.138 0.177 0.177 0.236 0.283 0.283 0.197 0.283 0.374 0.177 0.197 0.197 0.283 0.394 0.197 0.197 0.197 0.283 0.433 0.236 0.197 0.197 0.197 0.197 0.197
0.283 0.283 0.283 0.283 0.283 0.283 0.283
0.256 0.256 0.295 0.295 0.374 0.394 0.433
0.098 0.118 0.138 0.138 0.177 0.197 0.236
0.197 0.197 0.197 0.197 0.197 0.197 0.197
0.283 0.283 0.283 0.283 0.283 0.283 0.283 0.283
0.256 0.256 0.256 0.295 0.295 0.374 0.394 0.433
0.098 0.098 0.098 0.138 0.138 0.177 0.197 0.236
0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197
Sharma Film Capacitors
MKT 100 SERIES
Formerly MKT 1.60 series INTRODUCTION: The MKT 100 Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. These capacitors also have good high frequency characteristics. In addition to some specific applications such as Blocking, By-passing and Coupling, this series is widely used in all General Purpose applications. FEATURES: Wide value and Voltage range Flame retardant case and potting Consistent dimensions and surface finish due to molded case construction Self healing capability DIMENSIONS AND TOLERANCES:
"d" - 0.8 mm (0.032")) "LL'' - 6.0 1.0mm (0.24 0.04") Tolerance on "s" 0.4mm (0.016")
* * * *
PULSE RISE TIME (dv/dt) Volts per sec.
RATED VOLTAGE 100 160 250 400 630 1000 10.0 (0.40) 6 8 11 20 30 60 LEAD SPACING mm (inches) 15.0 (0.60) 3 5 7 10 15 25 22.5 (0.89) 2 3 4 5.5 8 15 27.5 (1.08) 1 2 3 5 7 10
GENERAL SPECIFICATIONS: Dissipation factor: 0.0150 at 10K Hz for capacitance 1.0 F 0.0100 at 1 K Hz for capacitance> 1.0 F Insulation resistance: For nominal voltage > 100 V DC, 30,000 M Ohms for C 0.33 F, 10,000 seconds for C> 0.33 F, For nominal voltage 100 V DC, 10,000 M Ohms for C 0.10 F, 1,000 seconds for C> 0.10 F at a temperature of 25 5 C. Capacitance tolerance: 5%(J), 10%(K) and 20%(M). Voltage Test: 1.6 times the rated voltage applied between terminals for 2 seconds at a temperature of 25 5 C. Temperature range: -55 to 100 C with derating above 85 C. Climatic category: F M D
LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test: 1. 2. 3. 4. Capacitance change shall remain within 5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible.
Case Dimensions in Millimeters 100V * 160V* 250V* 400V* 630V* 1000V
Voltage Cap Value in F 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8
100 V DC / 63 V AC
Dimensions Millimeters in L H T S
160 V DC / 90 V AC
Dimensions Millimeters in L H T S
250 V DC / 160 V AC
Dimensions Millimeters in L H T S
400 V DC / 200 V AC
Dimensions Millimeters in L H T S
630 V DC / 220 V AC
Dimensions Millimeters in L H T S
1000 V DC / 250 V AC
Dimensions Millimeters in L H T S 13.0 9.0 4.0 10.0 13.0 9.0 4.0 10.0 13.0 9.0 4.0 10.0 13.0 9.0 4.0 10.0 13.0 11.0 5.0 10.0 13.0 12.0 6.0 10.0 18.0 11.0 5.0 15.0 18.0 11.0 5.0 15.0 18.0 13.5 7.5 15.0 26.5 15.0 6.0 22.5 26.5 15.0 6.0 22.5 26.5 16.0 7.0 22.5 26.5 18.5 10.0 22.5 32.0 20.0 11.0 27.5 32.0 22.0 13.0 27.5
13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 32.0 32.0
9.0 11.0 11.0 11.0 12.0 13.5 16.0 17.0 18.5 20.0 22.0
4.0 5.0 5.0 5.0 6.0 7.5 7.0 8.5 10.0 11.0 13.0
10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 27.5 27.5
13.0 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 32.0 32.0
9.0 11.0 11.0 11.0 12.0 13.5 14.5 17.0 18.5 20.0 22.0
4.0 5.0 5.0 5.0 6.0 7.5 8.5 8.5 10.0 11.0 13.0
10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 27.5 27.5
13.0 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 32.0 32.0 32.0
9.0 9.0 9.0 11.0 11.0 11.0 12.0 15.0 16.0 17.0 17.0 20.0 22.0
4.0 4.0 4.0 5.0 5.0 5.0 6.0 6.0 7.0 8.5 9.0 11.0 13.0
10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 27.5 27.5 27.5
13.0 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 32.0 32.0
9.0 9.0 11.0 11.0 11.0 12.0 13.5 15.0 16.0 17.0 17.0 20.0
4.0 4.0 5.0 5.0 5.0 6.0 7.5 6.0 7.0 8.5 9.0 11.0
10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 27.5 27.5
13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 26.5 26.5 26.5 32.0 32.0
9.0 9.0 9.0 11.0 12.0 11.0 12.0 13.5 15.0 16.0 17.0 20.0 22.0
4.0 4.0 4.0 5.0 6.0 5.0 6.0 7.5 6.0 7.0 8.5 11.0 13.0
10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 22.5 22.5 22.5 27.5 27.5
Sharma Film Capacitors
MKT 100 SERIES CASE DIMENSIONS CONTINUED
Case Dimensions in Inches 100V * 160V* 250V* 400V* 630V* 1000V
Voltage Cap Value in F 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.001 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8
100 V DC / 63 V AC
DimensionsinInches L H T S
160 V DC / 90 V AC
DimensionsinInches L H T S
250 V DC / 160 V AC
DimensionsinInches L H T S
400 V DC / 200 V AC
DimensionsinInches L H T S
630 V DC / 220 V AC
DimensionsinInches L H T S
1000 V DC / 250 V AC
DimensionsinInches L H T S 0.512 0.354 0.157 0.394 0.512 0.354 0.157 0.394 0.512 0.354 0.157 0.394
0.512 0.354 0.157 0.394 0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.512 0.354 0.157 0.394 0.512 0.472 0.236 0.394 0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 0.512 0.354 0.157 0.394 0.512 0.472 0.236 0.394 0.709 0.531 0.295 0.591 0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 1.043 0.591 0.236 0.886 0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.591 0.236 0.886 0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.709 0.531 0.295 0.591 1.043 0.630 0.276 0.886 0.512 0.354 0.157 0.394 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.591 0.236 0.886 1.043 0.728 0.394 0.886 0.512 0.354 0.157 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 0.709 0.531 0.295 0.591 1.043 0.630 0.276 0.886 1.260 0.787 0.433 1.083 0.512 0.433 0.197 0.394 0.512 0.433 0.197 0.394 0.709 0.433 0.197 0.591 1.043 0.591 0.236 0.886 1.043 0.669 0.335 0.886 1.260 0.866 0.512 1.083 0.709 0.433 0.197 0.591 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.630 0.276 0.886 1.260 0.787 0.433 1.083 0.709 0.433 0.197 0.591 0.709 0.472 0.236 0.591 1.043 0.591 0.236 0.886 1.043 0.669 0.335 0.886 1.260 0.866 0.512 1.083 0.709 0.472 0.236 0.591 0.709 0.531 0.295 0.591 1.043 0.630 0.276 0.886 1.260 0.669 0.354 1.083 0.709 1.043 1.043 1.043 1.260 1.260 0.531 0.630 0.669 0.728 0.787 0.866 0.295 0.276 0.335 0.394 0.433 0.512 0.591 0.886 0.886 0.886 1.083 1.083 0.709 1.043 1.043 1.260 1.260 0.571 0.669 0.728 0.787 0.866 0.335 0.335 0.394 0.433 0.512 0.591 0.886 0.886 1.083 1.083 1.043 1.260 1.260 1.260 0.669 0.669 0.787 0.866 0.335 0.354 0.433 0.512 0.886 1.260 0.787 0.433 1.083 1.083 1.083 1.083
MKT 075
SERIES Formerly MKT 1.67 series
INTRODUCTION: The MKT 075 Series Metallized Polyester Film Capacitors are specially designed for use in thickly populated Printed Circuit Boards where miniaturization is important. These capacitors are widely used in all General Purpose applications. FEATURES: Wide value and Voltage range Flame retardant case and potting Consistent dimensions and surface finish due to molded case construction Self healing capability
DIMENSIONS AND TOLERANCES: "d" - 0.6 mm (0.024") for dimension "T" = 4mm (0.160") "d" - 0.8 mm (0.032") for dimension "T" > 4mm (0.160") "LL'' - 6.0 1.0mm (0.24 0.04") Tolerance on "s" 0.4mm (0.016")
* * * *
GENERAL SPECIFICATIONS: Dissipation factor: 0.015 at 10 K Hz for capacitance< 1.0 F Insulation resistance: For nominal voltage 100 V DC, 10,000 M Ohm for C 0.1F, 1,000 seconds for C> 0.1F, For nominal voltage > 100 V DC, 30,000 M Ohm for C 0.33F, 10,000 seconds for C> 0.33F. Capacitance tolerance: 5%(J), 10%(K)and 10%(M) Voltage Test : 1.6 times the rated voltage applied between terminals for 2 seconds. at temperature of 25 5 C Temperature range: -55 to 100 C with derating above 85 C Climatic category: F M D LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test: 1. 2. 3. 4. Capacitance change shall remain within 5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible.
PULSE RISE TIME (dv/dt)
Volts per sec.
RATED VOLTAGE 100 250 400 630
dv/dt per 6 15 30 40
VoltsSeconds
Sharma Film Capacitors
MKT 075
Capacitance in F
SERIES CASE DIMENSIONS Case Dimensions in Inches 100V * 250V
Capacitance in F L
Case Dimensions in Millimeters100V * 250V
VOLTAGE 100 V DC / 63 V AC
Dimensions in Millimeters L H T S L
DC/AC 250 V DC / 160 V AC
Dimensions in Millimeters H T S
VOLTAGE 100 V DC / 63 V AC
Dimensions in Inches H T S
DC/AC 250 V DC / 160 V AC
Dimensions in Inches L H T S
0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33
10.5 10.5 10.5 10.5 10.5 10.5 10.5
9.0 9.0 9.0 9.0 9.0 11.0 12.0
4.0 4.0 4.0 4.0 4.0 5.0 6.0
7.5 7.5 7.5 7.5 7.5 7.5 7.5
10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5
9.0 9.0 9.0 9.0 9.0 11.0 11.0 12.0
4.0 4.0 4.0 4.0 4.0 5.0 5.0 6.0
7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33
0.413 0.413 0.413 0.413 0.413 0.413 0.413
0.354 0.354 0.354 0.354 0.354 0.433 0.472
0.157 0.157 0.157 0.157 0.157 0.197 0.236
0.295 0.295 0.295 0.295 0.295 0.295 0.295
0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413
0.354 0.354 0.354 0.354 0.354 0.433 0.433 0.472
0.157 0.157 0.157 0.157 0.157 0.197 0.197 0.236
0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295
Capacitance in F L
VOLTAGE 400 V DC / 200 V AC
Dimensions in Millimeters H T S
DC/AC 630 V DC / 250 V AC
Dimensions in Millimeters L H T S
Capacitance in F L
VOLTAGE 400 V DC / 200 V AC
Dimensions in Inches H T S
DC/AC 630 V DC / 250 V AC
Dimensions in Inches L H T S
0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033
10.5 10.5 10.5 10.5 10.5 10.5
9.0 9.0 9.0 9.0 11.0 12.0
4.0 4.0 4.0 4.0 5.0 6.0
7.5 7.5 7.5 7.5 7.5 7.5
10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5
9.0 9.0 9.0 9.0 9.0 9.0 11.0 12.0
4.0 4.0 4.0 4.0 4.0 4.0 5.0 6.0
7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033
0.413 0.413 0.413 0.413 0.413 0.413
0.354 0.354 0.354 0.354 0.433 0.472
0.157 0.157 0.157 0.157 0.197 0.236
0.295 0.295 0.295 0.295 0.295 0.295
0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413
0.354 0.354 0.354 0.354 0.354 0.354 0.433 0.472
0.157 0.157 0.157 0.157 0.157 0.157 0.197 0.236
0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295
SERIES Formerly MPD 1 series INTRODUCTION: The MKTD01 Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. They are suitable for applications such as Blocking, By-passing and Coupling and are widely used in General communication equipment. FEATURES: value * Widehealingand Voltage range capability * Self retardant powder epoxy encapsulation * Flame overall dimensions due to dip coated construction * Minimum GENERAL SPECIFICATIONS: Dissipation factor: < 0.0100 at 1 K Hz for capacitance 1.0 F, < 0.0150 at 1 K Hz for capacitance> 1.0 F . Insulation resistance: For 100 VDC rated parts; 9,000 M Ohms for C 0.33 F 3,000 seconds for C> 0.33 F, at a temperature , of 25 5 C, For 250 to 630 VDC rated parts 15,000 M Ohms for C 0.33 F, ; 5,000 seconds for C> 0.33 F, at a temperature of 25 5 C. Capacitance tolerance: 5%(J),10%(K) and 20%(M) (Special parts with close tolerance of 1% and 2% available on request) Voltage Test : 1.6 times the rated voltage applied between terminals for 2 seconds. at a temperature of 25 5 C Temperature range: -55 to 85 .C Climatic category: F M F LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test: 1. Capacitance change shall remain within 5%. 2. Dissipation Factor shall be within 1.5 times the original limits. 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible. DIMENSIONS AND TOLERANCES: d - 0.6 mm (0.024") for Lead Spacing "s" = 10.0 mm (0.40") d - 0.8 mm (0.032") for Lead Spacing "s" > 10.0 mm (0.40") z - 1.5mm ( 0.06" ) max. LL'' - 20.0 mm min.(0.78") Tolerance on "s" 1.0mm (0.04") PULSE RISE TIME (dv/dt) Volts per sec.
LEAD Rated Voltage 100 250 400 630 10.0 (0.40) 6 11 20 30 SPACING 15.0 (0.60) 3 7 10 15 mm (inches) 27.0 (1.06) 1 3 5 7 22.5 (0.89) 2 4 5.5 8
MKTD01
Sharma Film Capacitors
MKTD01 SERIES CASE DIMENSIONS
Case Dimensions in Millimeters 100V * 250V * 400V * 630V
Capacitance in F L
Case Dimensions in Inches 100V * 250V * 400V * 630V
Capacitance in F L
VOLTAGE 100 V DC / 63 V AC
Dimensions in Millimeters H T S
DC/AC 250 V DC / 160 V AC
Dimensions in Millimeters L H T S
VOLTAGE 100 V DC / 63 V AC
Dimensions in Inches H T S
DC/AC 250 V DC / 160 V AC
Dimensions in Inches L H T S
0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8
12.5 12.5 12.5 18.0 18.0 18.0 18.0 26.0 26.0 26.0 31.0 31.0
9.5 10.0 10.0 10.5 11.5 12.0 14.0 14.0 16.0 19.0 23.0 25.0
5.0 5.0 5.5 5.5 6.0 6.5 7.5 7.5 9.0 11.0 12.0 14.0
10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 27.0 27.0
12.5 12.5 12.5 12.5 12.5 12.5 12.5 18.0 18.0 18.0 26.0 26.0 26.0 31.0 31.0 31.0 31.0
8.5 9.0 9.0 9.0 9.5 9.5 10.0 10.5 11.5 12.5 12.5 14.5 16.0 17.0 19.0 23.0 27.0
4.5 4.5 4.5 4.5 5.0 5.0 5.5 5.5 6.5 7.0 7.0 8.0 9.0 9.5 11.5 14.0 16.5
10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 22.5 22.5 22.5 27.0 27.0 27.0 27.0
0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8
0.492 0.492 0.492 0.709 0.709 0.709 0.709 1.024 1.024 1.024 1.220 1.220
0.374 0.394 0.394 0.413 0.453 0.472 0.551 0.551 0.630 0.748 0.906 0.984
0.197 0.197 0.217 0.217 0.236 0.256 0.295 0.295 0.354 0.433 0.472 0.551
0.394 0.394 0.394 0.591 0.591 0.591 0.591 0.886 0.886 0.886 1.063 1.063
0.492 0.492 0.492 0.492 0.492 0.492 0.492 0.709 0.709 0.709 1.024 1.024 1.024 1.220 1.220 1.220 1.220
0.335 0.354 0.354 0.354 0.374 0.374 0.394 0.413 0.453 0.492 0.492 0.571 0.630 0.669 0.748 0.906 1.063
0.177 0.177 0.177 0.177 0.197 0.197 0.217 0.217 0.256 0.276 0.276 0.315 0.354 0.374 0.453 0.551 0.650
0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.591 0.886 0.886 0.886 1.063 1.063 1.063 1.063
Capacitance in F L
VOLTAGE 400 V DC / 200 V AC
Dimensions in Millimeters H T S
DC/AC 630 V DC / 220 V AC
Dimensions in Millimeters L H T S
Capacitance in F L
VOLTAGE 400 V DC / 200 V AC
Dimensions in Inches H T S
DC/AC 630 V DC / 220 V AC
Dimensions in Inches L H T S
0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2
12.5 12.5 12.5 12.5 12.5 18.0 18.0 26.0 26.0 26.0 26.0 31.0 31.0 31.0 31.0
9.0 9.5 9.5 10.5 10.5 10.5 11.5 12.5 13.5 15.5 18.0 17.5 20.0 23.5 26.0
4.5 4.5 5.0 5.5 6.0 6.0 6.5 6.0 7.0 8.5 9.5 10.0 12.0 13.5 16.5
10.0 10.0 10.0 10.0 10.0 15.0 15.0 22.5 22.5 22.5 22.5 27.0 27.0 27.0 27.0
12.5 12.5 12.5 18.0 18.0 18.0 26.0 26.0 26.0 31.0 31.0 31.0 31.0
9.0 9.5 10.5 11.0 11.5 12.5 13.0 14.0 16.5 17.5 19.5 22.5 27.5
4.5 5.0 6.0 6.0 6.5 7.0 7.0 8.5 10.0 10.5 12.0 15.0 19.0
10.0 10.0 10.0 15.0 15.0 15.0 22.5 22.5 22.5 27.0 27.0 27.0 27.0
0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2
0.492 0.492 0.492 0.492 0.492 0.709 0.709 1.024 1.024 1.024 1.024 1.220 1.220 1.220 1.220
0.354 0.374 0.374 0.413 0.413 0.413 0.453 0.492 0.531 0.610 0.709 0.689 0.787 0.925 1.024
0.177 0.177 0.197 0.217 0.236 0.236 0.256 0.236 0.276 0.335 0.374 0.394 0.472 0.531 0.650
0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.886 0.886 0.886 0.886 1.063 1.063 1.063 1.063
0.492 0.492 0.492 0.709 0.709 0.709 1.024 1.024 1.024 1.220 1.220 1.220 1.220
0.354 0.374 0.413 0.433 0.453 0.492 0.512 0.551 0.650 0.689 0.768 0.886 1.083
0.177 0.197 0.236 0.236 0.256 0.276 0.276 0.335 0.394 0.413 0.472 0.591 0.748
0.394 0.394 0.394 0.591 0.591 0.591 0.886 0.886 0.886 1.063 1.063 1.063 1.063
SERIES Formerly MPD 2 series INTRODUCTION: The MKTD02 Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. This series has lead spacing starting from 7.5mm. and covers more values than the conventional series. They are suitable for applications such as Blocking, Bypassing and Coupling and are widely used in General communication equipment. FEATURES: Wide value and Voltage range Self healing capability Flame retardant powder epoxy encapsulation Minimum overall dimensions due to dip coated construction DIMENSIONS AND TOLERANCES: d - 0.6 mm (0.024") for Lead Spacing "s" = 10.0 mm (0.40") d - 0.8 mm (0.032") for Lead Spacing "s" > 10.0 mm (0.40") z - 1.5mm ( 0.06" ) max. LL'' - 20.0 mm min.(0.78") Tolerance on "s" 1.0mm (0.04")
MKT D02
* * * *
GENERAL SPECIFICATIONS:
Dissipation factor: < 0.0100 at 1 K Hz for capacitanc 1.0 F, < 0.0150 at 1 K Hz e PULSE RISE TIME (dv/dt) Volts per sec. for capacitance> 1.0 F.Insulation resistance: For 100 VDC rated parts; LEAD SPACING mm (inches) 9,000 M Ohms for C 0.33 F, 3,000 seconds for C> 0.33 F at a temperature of Rated 7.5 10.0 15.0 22.5 25 5 C. For 250 to 630 VDC rated parts 15,000 M Ohms for C 0.33 F, ; Voltage (0.30) (0.40) (0.60) (0.89) 5,000 seconds for C> 0.33 F at a temperature of 25 5 C. 100 6 6 3 2 Capacitance tolerance: 5%(J), 10%(K) and 20%(M) Voltage Test : 1.6 times the 250 15 11 7 4 rated voltage applied between terminals for 2 seconds. at a temperature of 25 5 C. 400 30 20 10 5.5 Temperature range: -55 to 85 C Climatic category: F M F
630 40 30 15 8
27.5 (1.08) 1 3 5 7
LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test: 1. 2. 3. 4. Capacitance change shall remain within 5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible.
Sharma Film Capacitors
MKT D02 SERIES CASE DIMENSIONS
Case Dimensions in Millimeters 100V * 250V * 400V * 630V
Capacitance in F L
Case Dimensions in Inches 100V * 250V * 400V * 630V
CAPACITANCE in F L
VOLTAGE 100 V DC / 63 V AC
Dimensions in Millimeters H T S
DC/AC 250 V DC / 160 V AC
Dimensions in Millimeters L H T S
VOLTAGE 100 V DC / 63 V AC
Dimensions in Inches H T S
DC/AC 250 V DC / 160 V AC
Dimensions in Inches L H T S
0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9
10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 21.0 21.0 21.0 21.0 21.0
7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 8.5 9.0 9.0 9.5 9.5 10.0 10.5 11.0 10.5 11.0 11.5 12.0 13.0 14.0 14.0 15.0 16.0 17.5 18.5
4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 5.0 5.5 4.5 5.0 5.5 6.0 6.5 7.0 5.5 6.0 6.5 7.0 7.5 8.5 8.5 9.0 10.0 10.5 11.0
7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 17.5 17.5 17.5 17.5 17.5
10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 21.0 21.0 21.0 21.0 21.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0
7.5 8.0 8.0 8.0 8.0 8.5 9.0 9.0 9.5 10.0 9.5 10.5 11.0 11.5 12.0 12.5 11.5 12.0 12.5 13.5 14.5 14.0 15.0 15.5 18.5 19.5 20.5 21.5 22.5
5.0 4.5 4.5 4.5 4.5 5.0 5.5 5.5 5.5 6.0 5.5 5.5 6.0 6.5 7.0 7.5 6.5 7.0 8.0 8.0 8.0 7.5 8.0 9.0 9.0 9.5 10.5 12.0 13.0
7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 17.5 17.5 17.5 17.5 17.5 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0
0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9
0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.512 0.512 0.512 0.512 0.512 0.512 0.709 0.709 0.709 0.709 0.709 0.709 0.827 0.827 0.827 0.827 0.827
0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.335 0.354 0.354 0.374 0.374 0.394 0.413 0.433 0.413 0.433 0.453 0.472 0.512 0.551 0.551 0.591 0.630 0.689 0.728
0.177 0.177 0.177 0.177 0.177 0.177 0.177 0.177 0.177 0.197 0.217 0.177 0.197 0.217 0.236 0.256 0.276 0.217 0.236 0.256 0.276 0.295 0.335 0.335 0.354 0.394 0.413 0.433
0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.394 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.591 0.591 0.591 0.591 0.689 0.689 0.689 0.689 0.689
0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.413 0.512 0.512 0.709 0.709 0.709 0.709 0.709 0.709 0.827 0.827 0.827 0.827 0.827 1.142 1.142 1.142 1.142 1.142 1.142 1.142 1.142
0.295 0.315 0.315 0.315 0.315 0.335 0.354 0.354 0.374 0.394 0.374 0.413 0.433 0.453 0.472 0.492 0.453 0.472 0.492 0.531 0.571 0.551 0.591 0.610 0.728 0.768 0.807 0.846 0.886
0.197 0.177 0.177 0.177 0.177 0.197 0.217 0.217 0.217 0.236 0.217 0.217 0.236 0.256 0.276 0.295 0.256 0.276 0.315 0.315 0.315 0.295 0.315 0.354 0.354 0.374 0.413 0.472 0.512
0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.295 0.394 0.394 0.591 0.591 0.591 0.591 0.591 0.591 0.689 0.689 0.689 0.689 0.689 0.984 0.984 0.984 0.984 0.984 0.984 0.984 0.984
CAPACITANCE in F L
VOLTAGE 400 V DC / 200 V AC
Dimensions in Millimeters H T S
DC/AC 630 V DC / 220 V AC
Dimensions in Millimeters L H T S
CAPACITANCE in F L
VOLTAGE 400 V DC / 200 V AC
Dimensions in Inches H T S
DC/AC 630 V DC / 220 V AC
Dimensions in Inches L H T S
0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0
10.5 10.5 10.5 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0
7.5 8.0 8.0 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 11.0 11.5 12.0 13.0 14.5 15.0 16.0 15.0 16.0 16.5 19.5 20.5 21.5 23.0
5.0 4.5 4.5 4.5 4.5 5.0 5.5 6.0 6.5 7.0 7.5 6.0 6.5 7.0 8.0 8.0 8.5 9.5 8.5 9.5 10.0 10.0 11.0 12.0 13.0
7.5 7.5 7.5 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 17.5 17.5 17.5 17.5 17.5 17.5 17.5 25.0 25.0 25.0 25.0 25.0 25.0 25.0
18.0 18.0 18.0 18.0 18.0 18.0 18.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 29.0 29.0 29.0 29.0 31.0 31.0 31.0
8.5 8.5 9.0 9.5 10.5 10.5 11.0 10.5 11.0 11.5 12.0 12.5 14.5 15.5 14.0 15.5 16.0 18.5 19.0 20.0 21.0
5.0 4.5 5.0 5.5 5.5 6.5 7.0 6.0 6.0 6.5 7.0 8.0 8.5 9.0 8.5 9.0 9.0 9.0 9.5 10.5 11.5
15.0 15.0 15.0 15.0 15.0 15.0 15.0 17.5 17.5 17.5 17.5 17.5 17.5 17.5 25.0 25.0 25.0 25.0 27.5 27.5 27.5
0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0
0.413 0.413 0.413 0.709 0.709 0.709 0.709 0.709 0.709 0.709 0.709 0.827 0.827 0.827 0.827 0.827 0.827 0.827 1.142 1.142 1.142 1.142 1.142 1.142 1.142
0.295 0.315 0.315 0.315 0.335 0.354 0.374 0.394 0.413 0.433 0.453 0.433 0.453 0.472 0.512 0.571 0.591 0.630 0.591 0.630 0.650 0.768 0.807 0.846 0.906
0.197 0.177 0.177 0.177 0.177 0.197 0.217 0.236 0.256 0.276 0.295 0.236 0.256 0.276 0.315 0.315 0.335 0.374 0.335 0.374 0.394 0.394 0.433 0.472 0.512
0.295 0.295 0.295 0.591 0.591 0.591 0.591 0.591 0.591 0.591 0.591 0.689 0.689 0.689 0.689 0.689 0.689 0.689 0.984 0.984 0.984 0.984 0.984 0.984 0.984
0.709 0.709 0.709 0.709 0.709 0.709 0.709 0.827 0.827 0.827 0.827 0.827 0.827 0.827 1.142 1.142 1.142 1.142 1.220 1.220 1.220
0.335 0.335 0.354 0.374 0.413 0.413 0.433 0.413 0.433 0.453 0.472 0.492 0.571 0.610 0.551 0.610 0.630 0.728 0.748 0.787 0.827
0.197 0.177 0.197 0.217 0.217 0.256 0.276 0.236 0.236 0.256 0.276 0.315 0.335 0.354 0.335 0.354 0.354 0.354 0.374 0.413 0.453
0.591 0.591 0.591 0.591 0.591 0.591 0.591 0.689 0.689 0.689 0.689 0.689 0.689 0.689 0.984 0.984 0.984 0.984 1.083 1.083 1.083
Sharma Film Capacitors
SERIES Formerly MPD 3 series INTRODUCTION: The MKTD03 Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. This series provides alternative dimensions for the same values covered by the other MKTD series. These capacitors are suitable for applications such as Blocking, By-passing and Coupling and are widely used in General communication equipment. FEATURES: Wide value and Voltage range Self healing capability Flame retardant powder epoxy encapsulation Minimum overall dimensions due to dip coated construction DIMENSIONS AND TOLERANCES: d - 0.6 mm (0.024") for Lead Spacing "s" = 10.0 mm (0.40") d - 0.8 mm (0.032") for Lead Spacing "s" > 10.0 mm (0.40") z - 1.5mm ( 0.06" ) max. LL'' - 20.0 mm min.(0.78") Tolerance on "s" 1.0mm (0.04") for s 15mm(0.6"). Tolerance on "s" 1.5mm (0.06") for s 20mm(0.78"). Tolerance on "s" 2.0mm (0.08") for s 27.5mm(1.08"). PULSE RISE TIME (dv/dt) Volts per sec.
LEAD Rated Voltage 100 250 400 630 10.0 (0.40) 6 11 20 30 SPACING 15.0 (0.60) 3 7 10 15 mm (inches) 22.5 (0.89) 2 4 5.5 8 27.0 (1.06) 1 3 5 7
MKT D03
* * * *
GENERAL SPECIFICATIONS: Dissipation factor: < 0.0100 at 1 K Hz for capacitance 1.0 F, < 0.0150 at 1 K Hz for capacitance> 1.0 F. Insulation resistance: For 100 VDC rated parts; 9,000 M Ohms for C 0.33 F, 3,000 seconds for C> 0.33 F at a temperature of 25 5 C. For 250 to 630 VDC rated parts; 15,000 M Ohms for C 0.33 F, 5,000 seconds for C> 0.33 F at a temperature of 25 5 C Capacitance tolerance: 5%(J), 10%(K) and 20%(M). Voltage Test : 1.6 times the rated voltage applied between terminals for 2 seconds. at a temperature of 25 5 C. Temperature range: -55 to 85 C. Climatic category: F M F LIFE TEST DETAILS: 1. 2. 3. 4.
Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test: Capacitance change shall remain within 5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible. Case Dimensions in Inches 100V * 250V * 400V * 630V
Capacitance in F L
Case Dimensions in Millimeters 100V * 250V * 400V * 630V
Capacitance in F L
VOLTAGE 100 V DC / 63 V AC
Dimensions in Millimeters H T S
DC/AC 250 V DC / 160 V AC
Dimensions in Millimeters L H T S
VOLTAGE 100 V DC / 63 V AC
Dimensions in Inches H T S
DC/AC 250 V DC / 160 V AC
Dimensions in Inches L H T S
0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10
13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.5 13.5 18.0 18.0 18.0 24.0 24.0 30.0 30.0 30.0
10.0 10.0 10.0 10.0 10.0 11.0 12.5 12.5 12.5 14.0 15.0 13.5 16.5 19.0 21.0 22.0 23.5 24.0 26.0
5.5 6.0 6.0 6.0 6.0 6.5 7.0 8.0 8.0 9.0 10.0 8.0 9.5 11.5 12.5 13.0 14.0 15.5 21.5
10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 20.0 20.0 27.5 27.5 27.5
13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 24.0 24.0 24.0 30.0 30.0 33.0 33.0
10.0 10.0 10.0 10.0 10.0 11.0 12.5 12.5 13.0 14.0 16.0 14.0 18.0 23.0 23.0 24.0 24.0 26.0
5.5 6.0 6.0 6.0 6.0 6.5 7.0 8.0 7.0 8.0 9.5 9.5 10.5 13.5 13.5 16.5 18.0 20.0
10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 20.0 20.0 20.0 27.5 27.5 30.0 30.0
0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10
0.512 0.512 0.512 0.512 0.512 0.512 0.512 0.512 0.512 0.531 0.531 0.709 0.709 0.709 0.945 0.945 1.181 1.181 1.181
0.394 0.394 0.394 0.394 0.394 0.433 0.492 0.492 0.492 0.551 0.591 0.531 0.650 0.748 0.827 0.866 0.925 0.945 1.024
0.217 0.236 0.236 0.236 0.236 0.256 0.276 0.315 0.315 0.354 0.394 0.315 0.374 0.453 0.492 0.512 0.551 0.610 0.846
0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.591 0.787 0.787 1.083 1.083 1.083
0.512 0.512 0.512 0.512 0.512 0.512 0.512 0.512 0.709 0.709 0.709 0.945 0.945 0.945 1.181 1.181 1.299 1.299
0.394 0.394 0.394 0.394 0.394 0.433 0.492 0.492 0.512 0.551 0.630 0.551 0.709 0.906 0.906 0.945 0.945 1.024
0.217 0.236 0.236 0.236 0.236 0.256 0.276 0.315 0.276 0.315 0.374 0.374 0.413 0.531 0.531 0.650 0.709 0.787
0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.591 0.787 0.787 0.787 1.083 1.083 1.181 1.181
Capacitance in F L
VOLTAGE 400 V DC / 200 V AC
Dimensions in Millimeters H T S
DC/AC 630 V DC / 220 V AC
Dimensions in Millimeters L H T S
Capacitance in F L
VOLTAGE 400 V DC / 200 V AC
Dimensions in Inches H T S
DC/AC 630 V DC / 220 V AC
Dimensions in Inches L H T S
0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3
13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 24.0 30.0 30.0 30.0 33.0 33.0
10.0 10.0 10.0 11.0 11.5 12.5 11.0 14.0 16.5 16.5 17.5 18.0 21.5 24.0 26.0 28.0
5.5 6.0 6.0 6.5 7.0 7.0 6.0 8.0 9.5 10.0 10.5 10.5 12.0 14.0 18.0 21.0
10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 20.0 27.5 27.5 27.5 30.0 30.0
13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 24.0 24.0 30.0 30.0 30.0 33.0
10.5 11.0 11.0 10.0 11.0 12.0 15.0 15.5 16.5 18.0 22.0 23.5 25.5 28.0
6.0 6.5 6.5 6.5 7.0 8.0 8.5 11.0 10.5 12.0 12.5 14.0 15.0 20.0
10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 20.0 20.0 27.5 27.5 27.5 30.0
0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3
0.512 0.512 0.512 0.512 0.512 0.512 0.709 0.709 0.709 0.709 0.945 1.181 1.181 1.181 1.299 1.299
0.394 0.394 0.394 0.433 0.453 0.492 0.433 0.551 0.650 0.650 0.689 0.709 0.846 0.945 1.024 1.102
0.217 0.236 0.236 0.256 0.276 0.276 0.236 0.315 0.374 0.394 0.413 0.413 0.472 0.551 0.709 0.827
0.394 0.394 0.394 0.394 0.394 0.394 0.591 0.591 0.591 0.591 0.787 1.083 1.083 1.083 1.181 1.181
0.512 0.512 0.512 0.709 0.709 0.709 0.709 0.709 0.945 0.945 1.181 1.181 1.181 1.299
0.413 0.433 0.433 0.394 0.433 0.472 0.591 0.610 0.650 0.709 0.866 0.925 1.004 1.102
0.236 0.256 0.256 0.256 0.276 0.315 0.335 0.433 0.413 0.472 0.492 0.551 0.591 0.787
0.394 0.394 0.394 0.591 0.591 0.591 0.591 0.591 0.787 0.787 1.083 1.083 1.083 1.181
Sharma Film Capacitors MKTD04 SERIES Features - Very small size, Epoxy coating, Flame retardant to UL94V-0 7.5mm Lead spacing. - Self-healing metallized polyester dielectric, Non-inductive construction. - High performance and efficiencies. Custom values, voltages, and case sizes available upon request. Application - Multi-purpose - Blocking & coupling - By-passing & Filtering, Timing Specifications Capacitance Range Operating temperature Rated Voltage Capacitance Tolerance Tangent of Loss Angle Insulation Resistance 0.001F to 1.0F -40 to +85C (up to 100C - derate voltage 1.25% per C ) 50/63, 100, 250, 400, 630, 1000V dc 2(G), 5(J), 10(K) % 0.008 or LESS (at 1KHz +25C) Voltage Charge : 1 min at +25C, 5C 50 Vdc for Vr<100Vdc, 100Vdc for Vr100Vdc 9,000 or more, c0.33f 5000S or more c>0.33f 1.6 x Vr applied for 2sec +25C, 5C (Between Terminal) +85C, 2C, 1.25 x Vr, 1000Hr Cap Change: < 5%, DF Change : <50x10 at 1khz Insulation Resistance: <50% of limit value +40C2C, 93% 2%, 21days Cap Change: < 5%, DF Change : <50x10 at 1khz Insulation Resistance: <50% of limit value Non-inductive wound metallized polyester film Epoxy dipped encasement, Flame retardant to UL94V-0 Solder coated or Tinned solid wire Orange/Brown Capacitance, Tolerance, Voltage When space permits, Capacitor Type will be marked
Voltage Test Endurance
Damp Heat
Construction Lead Material Color of Body Markings
- Special size or items on request. - Tolerance Dimension 0.5 mm.
Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327
Sharma Film Capacitors Capacitance 50/63DC F code Tmax Hmax Wmax P 0.0010 102 3.0 5.0 9.3 7.5 0.0012 122 3.0 5.0 9.3 7.5 0.0015 152 3.0 5.0 9.3 7.5 0.0018 182 3.0 5.0 9.3 7.5 0.0022 222 3.0 5.0 9.3 7.5 0.0027 272 3.0 5.0 9.3 7.5 0.0033 332 3.0 5.0 9.3 7.5 0.0039 392 3.0 5.0 9.3 7.5 0.0047 472 3.0 5.0 9.3 7.5 0.0056 562 3.0 5.0 9.3 7.5 0.0068 682 3.0 5.0 9.3 7.5 0.0082 822 3.0 5.0 9.3 7.5 0.010 103 3.0 5.0 9.3 7.5 0.012 123 3.0 5.0 9.3 7.5 0.015 153 3.0 5.0 9.3 7.5 0.018 183 3.0 5.0 9.3 7.5 0.022 223 3.0 5.0 9.3 7.5 0.027 273 3.0 5.0 9.3 7.5 0.033 333 3.0 5.2 9.3 7.5 0.039 393 3.0 5.2 9.3 7.5 0.047 473 3.0 5.2 9.3 7.5 0.056 563 3.0 5.2 9.3 7.5 0.068 683 3.0 5.2 9.3 7.5 0.082 823 3.0 5.2 9.3 7.5 0.10 104 3.0 5.2 9.3 7.5 0.12 124 3.0 5.5 9.3 7.5 0.15 154 3.0 6.0 9.3 7.5 0.18 184 3.3 6.5 9.3 7.5 0.22 224 3.5 6.5 9.3 7.5 0.27 274 4.0 7.0 9.3 7.5 0.33 334 4.0 7.5 9.3 7.5 0.39 394 4.5 7.8 9.3 7.5 0.47 474 4.8 8.0 9.3 7.5 0.56 564 5.0 9.0 9.3 7.5 0.68 684 5.2 9.2 9.3 7.5 0.82 824 5.8 10.8 9.3 7.5 1.0 105 5.8 10.8 9.3 7.5 100VDC Hmax Wmax P 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.2 9.3 7.5 5.2 9.3 7.5 5.2 9.3 7.5 5.2 9.3 7.5 5.2 9.3 7.5 5.2 9.3 7.5 5.2 9.3 7.5 5.5 9.3 7.5 6.0 9.3 7.5 6.5 9.3 7.5 6.5 9.3 7.5 7.0 9.3 7.5 7.5 9.3 7.5 7.8 9.3 7.5 8.0 9.3 7.5 9.0 9.3 7.5 9.2 9.3 7.5 10.8 9.3 7.5 10.8 9.3 7.5 250VDC Hmax Wmax P 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.0 9.3 7.5 5.2 9.3 7.5 -
d 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6
Tmax 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.3 3.5 4.0 4.0 4.5 4.8 5.0 5.2 5.8 5.8
d Tmax 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 3.0 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 -
d 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 -
Tel: (949) 642-7324
SECI Engineers & Buyers' Guide
Fax: (949) 642- 7327
Sharma Film Capacitors Capacitance 400V DC F code Tmax Hmax Wmax P 0.0010 102 3.0 5.0 9.3 7.5 0.0012 122 3.0 5.0 9.3 7.5 0.0015 152 3.0 5.0 9.3 7.5 0.0018 182 3.0 5.0 9.3 7.5 0.0022 222 3.0 5.0 9.3 7.5 0.0027 272 3.0 5.0 9.3 7.5 0.0033 332 3.0 5.0 9.3 7.5 0.0039 392 3.0 5.0 9.3 7.5 0.0047 472 3.0 5.0 9.3 7.5 0.0056 562 3.0 5.0 9.3 7.5 0.0068 682 3.0 5.0 9.3 7.5 0.0082 822 7.5 0.010 103 0.012 123 0.015 153 0.018 183 0.022 223 0.027 273 0.033 333 0.039 393 0.047 473 0.056 563 0.068 683 0.082 823 0.10 104 0.12 124 0.15 154 0.18 184 0.22 224 0.27 274 0.33 334 0.39 394 0.47 474 0.56 564 0.68 684 0.82 824 1.0 105 630V DC Tmax Hmax Wmax P 3.0 5.0 9.3 7.5 3.0 5.0 9.3 7.5 3.0 5.0 9.3 7.5 3.0 5.0 9.3 7.5 3.0 5.0 9.3 7.5 1000V DC Hmax Wmax P d 5.0 9.3 7.5 0.6 5.0 9.3 7.5 0.6 5.0 9.3 7.5 0.6 -
d 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 -
d Tmax 0.6 3.0 0.6 3.0 0.6 3.0 0.6 0.6 -
Tel: (949) 642-7324
SECI Engineers & Buyers' Guide
Fax: (949) 642- 7327
Sharma Film Capacitors
Taping Specifications For Automatic Insertion
Description Lead wire diameter Taping pitch Sprocket hole pitch Centering of the lead wire Centering of the body Lead spacing Component alignment Height from sprocket hole Height Center to the comp body Tape width Width of adhesive tape Sprocket hole alignment Position of adhesive tape Sprocket hole diameter Tape thickness
Symbol d P P0 P P2 F h H1 H L W W0 W1 W2 D0 T
Dimensions (mm) Lead Spacing 7.5mm 0.6 12.7 12.7 3.75 0 7.5 0 20.0 16.0 11.0 18.0 13.0 9.0 3max 4.0 0.7
Toll 0.05 0.1 0.2 0.5 0.8 2.0 0.5 0.5 0.5 +1.0-0.5 0.5 0.5 0.2 0.2
Standard Packing Quantity For Box
Tel: (949) 642-7324
SECI Engineers & Buyers' Guide
Fax: (949) 642- 7327
Sharma Film Capacitors
50-100V 102-124 1800PCS values 154-224 1500PCS values 274-474 1200PCS values 564-824 1000PCS values -
250V 102-273 2000PCS values 333-524 1500PCS values 154-184 1200PCS values 224-274 1000PCS values 334-474 800PCS values 564-684 700PCS values
400V 102-822 2000PCS values 103-223 1500PCS values 273-393 1200PCS values 473-563 1000PCS values 683-823 800PCS values 104 700PCS value
630V 1000V 102-392 102-182 2000PCS 2000PCS values values 472-822 222-332 1500PCS 1500PCS values values 103-123 392-822 1200PCS 1200PCS values values 153-223 103 1000PCS 1000PCS values value 273-333 800PCS values 393 700PCS value
Tel: (949) 642-7324
SECI Engineers & Buyers' Guide
Fax: (949) 642- 7327
Sharma Film Capacitors MKTD05 SERIES Features - Very small size, Epoxy coating, Flame retardant to UL94V-0 5mm Lead spacing. - Self-healing metallized polyester dielectric, Non-inductive construction. - High performance and efficiencies. Custom values, voltages, and case sizes available upon request. Application - Multi-purpose - Blocking & coupling - By-passing & Filtering, Timing Specifications Capacitance Range Operating Temperature Rated Voltage Capacitance Tolerance Tangent of Loss Angle Insulation Resistance 0.001F to 1.0F -40 to +85C (up to 100C - derate voltage 1.25% per C ) 50/63, 100, 250, 400, 630V DC 2(G), 5(J), 10(K) % 0.008 or LESS (at 1KHz +25C) Voltage Charge : 1 min at +25C, 5C 50 Vdc for Vr<100Vdc, 100Vdc for Vr100Vdc 9,000 or more, c0.33f 5000S or more c>0.33f 1.6 x Vr applied for 2sec +25C, 5C (Between Terminal) +85C, 2C, 1.25 x Vr, 1000Hr Cap Change: < 5%, DF Change : <50x10 at 1khz Insulation Resistance: <50% of limit value +40C2C, 93% 2%, 21days Cap Change: < 5%, DF Change : <50x10 at 1khz Insulation Resistance: <50% of limit value Non-inductive wound metallized polyester film Epoxy dipped encasement, Flame retardant to UL94V-0 Solder coated or Tinned solid wire Orange/Brown Capacitance, Tolerance, Voltage When space permits, Capacitor Type will be marked
Voltage Test Endurance
Damp Heat
Construction Lead Material Color of Body Markings
- Special size or items on request. - Tolerance Dimension 0.5 mm.
Tel: (949) 642-7324 SECI Engineers & Buyers' Guide Fax: (949) 642- 7327
Sharma Film Capacitors
Capacitance F code 0.001 102 0.0012 122 0.0015 152 0.0018 182 0.0022 222 0.0027 272 0.0033 332 0.0039 392 0.0047 472 0.0056 562 0.0068 682 0.0082 822 0.010 103 0.012 123 0.015 153 0.018 183 0.022 223 0.027 273 0.033 333 0.039 393 0.047 473 0.056 563 0.068 683 0.082 823 0.10 104 0.12 124 0.15 154 0.18 184 0.22 224 0.27 274 0.33 334 0.39 394 0.47 474 0.56 564 0.68 684 0.82 824 1.0 105
Tmax 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.5 4.0 4.0 4.3 4.8 5.0 5.5 5.8 6.3 6.3 6.3
50/63VDC Hmax Wmax 5.0 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.0 6.8 5.3 6.8 5.3 6.8 5.5 6.8 5.5 6.8 6.5 6.8 7.0 6.8 7.0 6.8 8.0 6.8 8.0 6.8 9.0 6.8 9.5 6.8 9.5 6.8 10.5 6.8 10.5 6.8 10.5 6.8
P 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0
d 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Tmax 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.5 4.0 4.0 4.3 4.8 5.0 5.5 5.8 6.3 6.3 6.3
Hmax 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.3 5.3 5.5 5.5 6.5 7.0 7.0 8.0 8.0 9.0 9.5 9.5 10.5 10.5 10.5
100VDC Wmax 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8
P 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0
d 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Tel: (949) 642-7324
SECI Engineers & Buyers' Guide
Fax: (949) 642- 7327
Sharma Film Capacitors
Capacitance 250VDC F code Tmax Hmax Wmax P 0.0010 102 3.2 5.0 6.8 5.0 0.0012 122 3.2 5.0 6.8 5.0 0.0015 152 3.2 5.0 6.8 5.0 0.0018 182 3.2 5.0 6.8 5.0 0.0022 222 3.2 5.0 6.8 5.0 0.0027 272 3.2 5.0 6.8 5.0 0.0033 332 3.2 5.0 6.8 5.0 0.0039 392 3.2 5.0 6.8 5.0 0.0047 472 3.2 5.0 6.8 5.0 0.0056 562 3.2 5.0 6.8 5.0 0.0068 682 3.2 5.0 6.8 5.0 0.0082 822 3.2 5.0 6.8 5.0 0.010 103 3.2 5.0 6.8 5.0 0.012 123 3.2 5.0 6.8 5.0 0.015 153 3.2 5.0 6.8 5.0 0.018 183 3.2 5.0 6.8 5.0 0.022 223 3.2 5.0 6.8 5.0 0.027 273 3.2 5.0 6.8 5.0 0.033 333 3.2 5.0 6.8 5.0 0.039 393 0.047 473 0.056 563 0.068 683 0.082 823 0.10 104 0.12 124 0.15 154 0.18 184 0.22 224 0.27 274 0.33 334 0.39 394 0.47 474 0.56 564 0.68 684 0.82 824 1.0 105 -
d 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 -
400VDC Tmax Hmax Wmax P 3.2 5.0 6.8 5.0 3.2 5.0 6.8 5.0 3.2 5.0 6.8 5.0 3.2 5.0 6.8 5.0 3.2 5.0 6.8 5.0 3.2 5.0 6.8 5.0 3.2 5.0 6.8 5.0 3.2 5.0 6.8 5.0 3.2 5.0 6.8 5.0 3.2 5.0 6.8 5.0 3.2 5.0 6.8 5.0 3.2 5.0 6.8 5.0 3.2 5.0 6.8 5.0 -
d Tmax 0.5 3.2 0.5 3.2 0.5 3.2 0.5 3.2 0.5 3.2 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 -
630VDC Hmax Wmax P 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 5.0 6.8 5.0 -
d 0.5 0.5 0.5 0.5 0.5 -
Tel: (949) 642-7324
SECI Engineers & Buyers' Guide
Fax: (949) 642- 7327
Sharma Film Capacitors
Taping Specifications For Automatic Insertion
Description Lead wire diameter Taping pitch Sprocket hole pitch Centering of the lead wire Centering of the body Lead spacing Component alignment Height from sprocket hole Height Center to the comp body Tape width Width of adhesive tape Sprocket hole alignment Position of adhesive tape Sprocket hole diameter Tape thickness
Symbol d P P0 P1 P2 F h H1 H0 L W W0 W1 W2 D0 T
Dimensions (mm) Lead Spacing 5mm 0.3 12.7 12.7 3.85 6.35 5.0 0 20.0 16.0 11.0 18.0 13.0 9.0 3max 4.0 0.7
Toll 0.05 0.1 0.2 0.5 1.3 0.8 2.0 0.5 0.5 0.5 +1.0-0.5 0.5 0.5 0.2 0.2
Standard Packing Quantity For Box
50-100V 102-104 values 2000PCS 124-182 values 1500PCS 224-474 values 1200PCS 564-824 values 1000PCS 105-125 values 800PCS
Tel: (949) 642-7324
250V 102-183 values 223-333 values 393-473 values 563-823 values 104-224 values
2000PCS 1500PCS 1200PCS 1000PCS 800PCS
400V 102-822 values 103-153 values 183-273 values 333-393 values 474-563 values
2000PCS 1500PCS 1200PCS 1000PCS 800PCS
SECI Engineers & Buyers' Guide
Fax: (949) 642- 7327
Sharma Film Capacitors MKTD06 SERIES Features - Metallized polyester film, epoxy resin coating - Large C-values in small dimensions - Excellent self-healing properly and high reliability Specifications Operating Temperature Rated Voltage Capacitance Range Capacitance Tolerance Dissipation Factor Insulation Resistance Voltage Test
-40+85C DC 250V, 400V, 630V 0.01 to 6.8 Mfd 5%, 10% <0.01 (At 1KHz) Cr0.33F:7,500Mohm, Ur >100V Cr>0.33F: >25,000Mohm*F, Ur >100V 1.4 Ur (Is)
- Special size or items on request. - Tolerance Dimension 1.0 mm. VDC Mfd 0.01 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10
Tel: (949) 642-7324
W 12 12 12 12 12 12 12 12 12 12 12 12
250VDC T H 6 8.5 6 8.5 6 8.5 6 9.5 6 9.5 6 9.5 6 9.5 6 9.5 6 9.5 6 9.5 6 9.5 6 9.5
P 10 10 10 10 10 10 10 10 10 10 10 10
W 11.5 11.5 11.5 12 12 12 12 12 12.5 12.5 12.5 12.5
400VDC T H 5 8 5 8 5 8 5 9 5 9 5 9 5 9 5 9 5 9 5 9 5 9 6 10.5
P 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5
W 12 12 12 13 13 13 13 17.5 17.5 17.5 17.5 17.5
630VDC T H 5 8.5 5 8.5 5 8.5 6 9.5 6 9.5 6 10 6 10 6 10 6 10 6 10 6 10.5 6 11
P 10 10 10 10.5 10.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5
SECI Engineers & Buyers' Guide
Fax: (949) 642- 7327
Sharma Film Capacitors 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.50 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.5 2.7 6.8
*All sizes for reference only *
13 13 13 13 17 17 17 17 18 18 18 23 23 23 24 28 28 28 32
6.5 7 7 7 7 7 7 7 7 7 7.5 7.5 7.5 8 8 8.5 8.5 9 10
10.5 10.5 10.5 10.5 10.5 10.5 11.5 11.5 11.5 13.5 13.5 13.5 13.5 14.5 14.5 16 18 18 18
10.5 10.5 10.5 10.5 15 15 15 15 15 15 15 20 20 20 20 25 25 25 30
17.5 6.5 9.5 17.5 5.5 9.5 17.5 5.5 9.5 17.5 5.5 9.5 19 7.5 12.5 19 7.5 9.5 19 7.5 15.5 22.5 5.5 11.5 23.5 6 11.5 23.5 8 12 23.5 8 12 23.5 8.5 18.5 28 8.5 18 28 9.5 18 28 9.5 18 30 10 19 30 10.5 19.5 30 10.5 19.5 30 10.5 19.5
15.5 15.5 15.5 15.5 16.0 20.5 16.0 20.5 20.5 25.5 25.5 20 20 25.5 25.5 28 28 28 28
17.5 17.5 23 23 23 23 23 23 23 28.5 28.5 28.5 28.5 28.5 28.5 30.5 30.5 30.5 30.5
8 8 8.5 8.5 8.5 8.5 9 9 9 9.5 9.5 10.5 10.5 13.5 13.5 13.5 13.5 13.5 13.5
13 13 14.5 14.5 14.5 14.5 15 15 15 18 18 19 19 22 22 22 22 22 22
15.5 15.5 20.5 20.5 20.5 20.5 20.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 28.5 28.5 28.5 28.5
Tel: (949) 642-7324
SECI Engineers & Buyers' Guide
Fax: (949) 642- 7327
Sharma Film Capacitors
MKT 00S SERIES
Formerly SMX series INTRODUCTION The MKT00S Series Metallized Polyester Film Capacitors are miniature capacitors specially developed for Surface Mount Technology. This series covers a wide range of values and voltages in three convenient case sizes and have excellent electrical characteristics. The MKT00S series has fire retardant epoxy molded encapsulation which also provide high insulation resistance. FEATURES DIMENSIONS AND TOLERANCES: "d" - 0.5 - 0.6 mm (0.020" - 0.024") for dimension "T" < 3.5mm (0.138") "d" - 0.6 mm (0.024") for dimension "T" > 3.5mm (0.138") "LL'' - 4.0 +1.5mm (0.16 + 0.06") for bulk supply
* Ultra miniature size range in just three case sizes * Wide value and voltageencapsulation * Flame retardant epoxy and surface finish due to molded construction * Consistent dimensions high speed assembly machines * Compatible with all popular and Bulk packing * Available in Carrier Tape, Stick * Self healing capability * Compatible with all standard standard SMT soldering methods
GENERAL SPECIFICATIONS: Dissipation factor: 0.0070 max at 1 K Hz Insulation resistance: >15,000 M Ohms at a temperature of 25 5 C, when measured at: 10 1 V DC for 63V DC rated capacitors, 100 15 V DC for 100 to 400V DC rating and, 500 50 V DC for 630V DC rating. Capacitance tolerance: 10%(K). 5%(J) available on request Voltage Test : 1.5 times the rated voltage applied between terminals for 2 seconds.at a temperature of 25 5 C Temperature range: -40 to 105 C with derating above 85 C. Climatic category: F M E LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test: 1. 2. 3. 4. Capacitance change shall remain within 5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible.
CASE SIZE TABLE
VOLTAGE V DC (Voltage Code)
Capacitance in F
63
(1J)
100
(2A)
250
(2E)
400
(2G)
630
(2J)
0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22
G G H H
G G G G G H H J J
H H J J
H J J
H H J
Volts per Second.
Rated Voltage 50 63 100
PULSE RISE TIME (dv/dt) Capacitance Range F 0.001-1.0 0.001-1.0 >0.0068 0.0033-0.0068 >0.0033 0.001-1.0 0.001-1.0 dv/dt
Value
4 8 10 15 30 20 40
CASE DIMENSIONS TABLE
CASE SIZE W 5.2 (0.205) 8.2 (0.323) 8.2 (0.323) Dimensions H 3.2 (0.126) 4.5 (0.177) 5.0 (0.197) Millimeters L 7.2 (0.283) 10.0 (0.394) 12.5 (0.492) (Inches) a 1.0 (0.039) 1.5 (0.059) 2.0 (0.079) b 3.0 (0.118) 4.0 (0.157) 4.0 (0.157)
100 100 250 400
G H J
TOLRANCE ON DIMENSIONS: 0.2mm (.008")
Ordering Information
Example at right indicates: MKT 00S Series, 400 V DC, 0.047 F, 10%, Stick Magazine packing
(EXAMPLE)
Series
M
K
T
0
0
S
2
G
4
7
3
K
S
Series Code: MKT 00S Voltage Code Voltage Code DC Voltage Capacitance First Two Digits Represent Significant Figures of Capacitance in Picofarads. Third Digit Indicates Number of Zeros Tolerance Capacitance Tolerance Code: Capacitance Tolerance 20% Code M Packing Method Code Packing Code Method Case Sizes O T S Bulk Tape Stick
G,H,J G H, J
1J
63V
2A
2E
2G
2J
100V 250V
400V 630V
10% K
5% J
Sharma Film Capacitors
MKT 00S Packaging Specification
TAPE DIMENSIONS LEADER SPECIFICATIONS
DIMENSION DIMENSION in MILLIMETERS DIMENSION in INCHES DIMENSION DIMENSION in MILLIMETERS DIMENSION in INCHES
A 5.6 0.3 0.220 0.012 P2 2 0.05 0.079 0.002
B 7.6 0.3 0.299 0.012 P0 4 0.1 0.157 0.004
W 12 0.3 0.472 0.012 D0 1.5 0.1 0.059 0.004
F 5.5 0.05 0.217 0.002 T 0.3 0.1 0.012 0.004
E 1.75 0.1 0.069 0.004 T2 4.2 0.2 0.165 0.008
P1 8 0.1 0.315 0.004
DIMENSION DIMENSION in MILLIMETERS DIMENSION in INCHES
A 40 min 1.575 min
B 40 min 1.575 min
C 550 to 1200 21.65 to 47.24
PEEL-OFF
REEL DIMENSIONS (500 pcs/Reel)
STICK MAGAZINE DIMENSIONS Dimensions in Millimeters
A o178 2.0 o330 2.0 B o50 min. o100 min. C 13.0 0.5 13.0 0.5 D 21.0 0.8 21.0 0.8 E 2.0 0.8 2.0 0.8 W 8.8/12.8 1.5 8.8/12.8 1.5 t 2.0 0.5 2.0 0.6
Dimensions in Inches
A o7 0.08 B o2.0 min. o4.0 min. C 5.0 0.02 5.0 0.3 D 0.83 0.03 0.83 0.03 E 0.08 0.3 0.08 0.3 W 0.35/0.50 0.06 0.35/0.50 0.06 t 0.08 0.02 0.08 0.02
DIMENSION DIMENSION in MILLIMETERS DIMENSION in INCHES DIMENSION DIMENSION in MILLIMETERS DIMENSION in INCHES
A 10.5 0.2 0.413 0.008 C 5 0.2 0.197 0.008
a 9.1 0.2 0.358 0.008 D 2.5 0.2 0.098 0.008
B 9.5 0.2 0.374 0.008 L 670 2.0 26.378 0.080
b 6.3 0.2 0.248 0.008
o13 0.08
STANDARD PACKING QUANTITY
CASE SIZE G H J
QUANTITY PER PACK TAPE STICK BULK 500 NA 100 NA 60 100 NA 50 100
Sharma Film Capacitors
MKTR
SERIES Formerly MPR series
1.4" max L max. 1.4" max D max.
INTRODUCTION The MKTR Series Round Axial Metallized Polyester Film Capacitors cover a wide range of values and voltages. These capacitors also have good high frequency characteristics and are suitable for applications such as Blocking, By-passing, Coupling and all General Purpose applications. FEATURES Voltage range * Wide value andaxial construction for different typed of mounting Tape wrapped * Reduced dimensions due to taped wrapped encapsulation * Self healing capability * Available in tape and reel form for automatic insertion * * Close tolerance 1% and 2% available on request
(please check with us about availability of specific values)
d
DIMENSIONS AND TOLERANCES "d" = 0.6 mm (0.024") For D6.0 mm "d" = 0.8 mm (0.032") For D>6.0 mm PULSE RISE TIME (dv/dt) Volts per sec.
RATED VOLTAGE 100 160 250 400 630 1000 dv / dt rating in volts / seconds 1 2 3 5 7 10
GENERAL SPECIFICATIONS Dissipation factor: 0.0100 at 1 K Hz Insulation resistance: For 100 VDC rated parts; 9,000 M Ohms for C 0.33 F, 3,000 seconds for C> 0.33 F at a temperature of 25 5 C. For 250 to 630 VDC rated parts; 15,000 M Ohms for C 0.33 F, 5,000 seconds for C> 0.33 F at a temperature of 25 5 C. Capacitance tolerance: 5%(J), 10%(K) and 20%(M). Voltage Test : 1.6 times the rated voltage applied between terminals for 2 seconds. at a temperature of 25 5 C. Temperature range: -40 to 85 C with derating above 85 C. Climatic category: G P D LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test:; 1. Capacitance change shall remain within 5%. 2. Dissipation Factor shall be within 1.5 times the original limits 3. Insulation Resistance shall be above 30% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible.
Case Dimensions in Millimeters: 100V * 160V * 250V * 400V * 630V
VOLTAGE DC VOLTAGE AC Capacitance in uF 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 100 63 Dimensions in MM D L 5 10.5 5 10.5 5 10.5 5 10.5 5.5 10.5 5.5 10.5 5.5 10.5 5.5 14 5.5 14 5.5 14 6.5 14 6.5 19 7.5 19 9.5 19 9.5 27 11 27 12.5 27 14 32 160 90 Dimensions in MM D L 5 10.5 5 10.5 5 10.5 5 10.5 5.5 10.5 5.5 10.5 6 10.5 6 14 6.5 14 7.5 14 7.5 19 8 19 9.5 19 9.5 27 11 27 13 27 14 32 17 32 250 160 Dimensions in MM D L 5 10.5 5 10.5 5 10.5 5 10.5 5.5 14 5.5 14 6 14 7 19 7 19 8 19 9.5 27 9.5 27 10.5 27 12.5 27 14 32 16 32 18.5 32 21.5 47 400 200 Dimensions in MM D L 5 10.5 5.5 14 5.5 14 6 14 7 14 7 19 7.5 19 8.5 19 8.5 27 10 27 12.5 27 12.5 32 14.5 32 17.5 32 20.5 32 20.5 47 23 47 27 47 630 220 Dimensions in MM D L 6 14 6.5 14 7 14 7 19 7.5 19 8.5 19 9 27 10.5 27 11.5 27 11.5 32 14 32 16.5 32 20 32 19 47 23 47 28 47
Case Dimensions in Inches: 100V * 160V * 250V * 400V * 630V
VOLTAGE DC VOLTAGE AC Capacitance in uF 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 100 63 Dimensions in Inches D L 0.197 0.413 0.197 0.413 0.197 0.413 0.197 0.413 0.217 0.413 0.217 0.413 0.217 0.413 0.217 0.551 0.217 0.551 0.217 0.551 0.256 0.551 0.256 0.748 0.295 0.748 0.374 0.748 0.374 1.063 0.433 1.063 0.492 1.063 0.551 1.260 160 90 Dimensions in Inches D L 0.197 0.413 0.197 0.413 0.197 0.413 0.197 0.413 0.217 0.413 0.217 0.413 0.236 0.413 0.236 0.551 0.256 0.551 0.295 0.551 0.295 0.748 0.315 0.748 0.374 0.748 0.374 1.063 0.433 1.063 0.512 1.063 0.551 1.260 0.669 1.260 250 160 Dimensions in Inches D L 0.197 0.413 0.197 0.413 0.197 0.413 0.197 0.413 0.217 0.551 0.217 0.551 0.236 0.551 0.276 0.748 0.276 0.748 0.315 0.748 0.374 1.063 0.374 1.063 0.413 1.063 0.492 1.063 0.551 1.260 0.630 1.260 0.728 1.260 0.846 1.850 400 200 Dimensions in Inches D L 0.197 0.413 0.217 0.551 0.217 0.551 0.236 0.551 0.276 0.551 0.276 0.748 0.295 0.748 0.335 0.748 0.335 1.063 0.394 1.063 0.492 1.063 0.492 1.260 0.571 1.260 0.689 1.260 0.807 1.260 0.807 1.850 0.906 1.850 1.063 1.850 630 220 Dimensions in Inches D L 0.236 0.551 0.256 0.551 0.276 0.551 0.276 0.748 0.295 0.748 0.335 0.748 0.354 1.063 0.413 1.063 0.453 1.063 0.453 1.260 0.551 1.260 0.650 1.260 0.787 1.260 0.748 1.850 0.906 1.850 1.102 1.850
Sharma Film Capacitors
MKTO
SERIES Formerly MPO series
INTRODUCTION The MKTO Series Flat Axial Metallized Polyester Film Capacitors cover a wide range of values and voltages. These capacitors also have good high frequency characteristics and are suitable for; Blocking, By-passing, Coupling and all General Purpose applications. This series is specifically designed for mounting in locations where height is critical or where different mounting options are required. FEATURES: value and Voltage * Wideaxial construction forrange types of mounting Flat * Reduced dimensions duedifferent wrapped encapsulation * Self healing capability to tape * GENERAL SPECIFICATIONS
(1.4" min.)
(1.4" min.)
DIMENSIONS AND TOLERANCES "d" - 0.8 mm (0.032") PULSE RISE TIME (dv/dt) Volts per sec.
RATED VOLTAGE 100 160 250 dv / dt rating in volts / seconds 1 2 3 5 7 10
400 Dissipation factor: 0.0100 at 1 K Hz. Insulation resistance: For 100 VDC 630 rated parts; 9,000 M Ohms for C 0.33 F, 3,000 seconds for C> 0.33 F 1000 at a temperature of 25 5 C. For 250 to 630 Case Dimensions in Millimeters: 100V * 250V * 400V * 630V VDC rated parts; 15,000 M Ohms for C VOLTAGE (DC) 100 V DC 250 V DC 0.33 F 5,000 seconds for VOLTAGE (AC) 63 V AC 160 V AC Dimensions Dimensions C> 0.33 F at a temperature Capacitance in Millimeters in Millimeters of 25 5 C. Capacitance in F L H T L H T tolerance: 5%(J), 10%(K) 0.01 and 20%(M) Voltage Test: 0.015 1.6 times the rated voltage 0.022 applied between terminals 0.033 0.047 for 2 seconds. at a tempera0.068 ture of 25 5 C 0.1 14.0 8.0 4.5 14.0 8.0 4.5 Temperature range: -40 to 0.15 14.0 8.0 4.5 14.0 9.0 5.0 85 C with derating above 0.22 14.0 8.5 5.0 19.0 9.0 5.0 85 C. 0.33 19.0 8.0 4.5 19.0 10.5 5.5 Climatic category: G P D 0.47 19.0 9.0 5.0 19.0 12.0 7.0
0.68 19.0 19.0 19.0 27.0 27.0 32.0 32.0 10.5 12.0 14.0 14.0 17.0 18.0 21.0 5.5 6.0 8.5 7.0 9.5 10.0 11.0 27.0 27.0 32.0 32.0 32.0 32.0 47.0 12.0 13.0 15.0 16.5 20.5 25.0 23.0 6.0 7.0 8.5 10.0 12.0 14.0 14.0
400 V DC 200 V AC
Dimensions in Millimeters L H T L 14.0 14.0 14.0 19.0 19.0 19.0 19.0 19.0 19.0 27.0 27.0 32.0 32.0 32.0 32.0 47.0 47.0 47.0 10.0 11.0 13.0 13.0 14.0 16.0 18.5 22.0 24.0 23.5 27.0 34.0 5.0 6.5 8.0 7.0 8.0 9.0 10.5 12.0 16.0 15.0 18.0 22.0 27.0 27.0 27.0 32.0 32.0 32.0 32.0 47.0 47.0 47.0
630 V DC 220 V AC
Dimensions in Millimeters H 7.0 7.5 8.0 10.0 10.0 11.0 10.5 13.0 14.5 15.0 17.0 20.0 26.0 23.5 25.5 34.0 T 4.5 5.0 6.0 5.0 5.0 6.0 6.0 7.5 8.5 9.5 12.0 15.0 17.0 16.5 17.5 21.0
LIFE TEST DETAILS: Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test:; 1. Capacitance change shall remain within 5%. 2. Dissipation Factor shall be within 1.5 times the original limits 3. Insulation Resistance shall be above 50% of the initial limits. 4. There shall be no remarkable change in the appearance and the marking shall remain legible.
1 1.5 2.2 3.3 4.7 6.8
Case Dimensions in Inches: 100V * 250V * 400V * 630V
VOLTAGE VOLTAGE (DC) (AC)
100 V DC 63 V AC
Dimensions in Inches L H T L
250 V DC 160 V AC
Dimensions in Inches H T L
400 V DC 200 V AC
Dimensions in Inches H T L 0.551 0.551 0.551 0.748 0.748 0.748
630 V DC 220 V AC
Dimensions in Inches H 0.276 0.295 0.315 0.394 0.394 0.433 0.413 0.512 0.571 0.591 0.669 0.787 1.024 0.925 1.004 1.339 T 0.177 0.197 0.236 0.197 0.197 0.236 0.236 0.295 0.335 0.374 0.472 0.591 0.669 0.650 0.689 0.827
Capacitance in F 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 0.551 0.551 0.551 0.748 0.748 0.748 0.748 0.748 1.063 1.063 1.260 1.260
0.315 0.315 0.335 0.315 0.354 0.413 0.472 0.551 0.551 0.669 0.709 0.827
0.177 0.177 0.197 0.177 0.197 0.217 0.236 0.335 0.276 0.374 0.394 0.433
0.551 0.551 0.748 0.748 0.748 1.063 1.063 1.260 1.260 1.260 1.260 1.850
0.315 0.354 0.354 0.413 0.472 0.472 0.512 0.591 0.650 0.807 0.984 0.906
0.177 0.197 0.197 0.217 0.276 0.236 0.276 0.335 0.394 0.472 0.551 0.551
0.748 0.748 0.748 1.063 1.063 1.260 1.260 1.260 1.260 1.850 1.850 1.850
0.394 0.433 0.512 0.512 0.551 0.630 0.728 0.866 0.945 0.925 1.063 1.339
0.197 0.256 0.315 0.276 0.315 0.354 0.413 0.472 0.630 0.591 0.709 0.866
1.063 1.063 1.063 1.260 1.260 1.260 1.260 1.850 1.850 1.850
Sharma Film Capacitors
MKT FS
SERIES
INTRODUCTION: The MKTFS Series Metallized Polyester Film Capacitors cover a wide range of values and voltages. This series provides alternative dimensions for the same values covered by the other MKTD series. These capacitors are suitable for applications such as Blocking, By-passing and Coupling and are widely used in General communication equipment. FEATURES: Wide value and Voltage range Self healing capability Flame retardant powder epoxy encapsulation Minimum overall dimensions due to dip coated construction DIMENSIONS AND TOLERANCES: d - 0.7 mm z - 3 mm max. LL - 20.0 mm min. Tolerance on P 1.5 mm
* * * *
GENERAL SPECIFICATIONS: Dissipation factor: < 0.0100 at 1 K Hz for capacitance 1.0 F, < 0.0150 at 1 K Hz for capacitance> 1.0 F. Insulation resistance: For 100 VDC rated parts; 9,000 M Ohms for C 0.33 F, 3,000 seconds for C> 0.33 F at a temperature of 25 5 C. For 250 to 630 VDC rated parts; 15,000 M Ohms for C 0.33 F, 5,000 seconds for C> 0.33 F at a temperature of 25 5 C Capacitance tolerance: 5%(J) and 10%(K). Voltage Test : 1.75 times the rated voltage applied between terminals for 5 seconds. at a temperature of 25 5 C. Temperature range: -40 to 85 C. LIFE TEST DETAILS: 1. 2. 3. 4. PULSE RISE TIME (dv/dt) Volts per sec.
LEAD Rated Voltage 100 250 400 630 10.0 (0.40) 6 11 20 30 SPACING 15.0 (0.60) 3 7 10 15 mm (inches) 22.5 (0.89) 2 4 5.5 8 27.0 (1.06) 1 3 5 7
Capacitors shall withstand 125% DC rated voltage or 100% AC rated voltage applied at 85 C for 1000 hours. After the test: Capacitance change shall remain within 5%. Dissipation Factor shall be within 1.5 times the original limits. Insulation Resistance shall be above 50% of the initial limits. There shall be no remarkable change in the appearance and the marking shall remain legible. Case Dimensions in Millimeters 400V * 630V
Capacitance in F
Case Dimensions in Millimeters 100V * 250V
Capacitance in F L
VOLTAGE DC/AC 100 V DC / 63 V AC 250 V DC / 160 V AC
Dimensions in Millimeters H T P L Dimensions in Millimeters H T P
VOLTAGE DC/AC 400 V DC / 200 V AC 630 V DC / 220 V AC
L Dimensions in Millimeters H T P L Dimensions in Millimeters H T P
0.01 0.015 0.022 0.033 0.047 0.056 0.068 0.082 0.1 0.15 0.22 0.33 0.47 0.56 0.68 1.0 1.5 2.2 3.3 4.7 10
13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.5 18.5 18.5 18.5 24.0 30.0 30.0 37.0
9.5 9.5 9.5 9.5 10.0 10.0 10.0 10.0 9.5 1.5 11.0 11.0 11.0 11.0 12.0 13.5 15.5 16.0 19.0 20.0 25.0
5.0 5.0 5.0 5.0 5.5 5.5 5.0 5.5 5.0 5.5 5.5 6.0 6.0 5.5 6.0 7.5 8.5 9.0 12.0 12.0 18.0
11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 16.0 16.0 16.0 16.0 21.5 21.5 26.5 32.5
13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.5 18.5 18.5 24.0 24.0 30.0 30.0 30.0
9.5 9.5 9.5 9.5 10.0 10.0 10.0 10.0 9.5 10.5 11.0 11.5 12.5 13.0 13.5 13.0 16.5 17.0 21.0 24.0
5.0 5.0 5.0 5.0 5.5 5.5 5.0 5.5 5.0 5.5 6.0 6.0 6.0 6.5 7.0 6.0 8.5 9.0 12.0 15.0
11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 15.0 15.5 15.5 21.0 21.5 27.0 27.5 27.5
0.01 0.015 0.022 0.033 0.047 0.056 0.068 0.082 0.1 0.15 0.22 0.33 0.47 0.56 0.68 1.0 1.5
13.0 13.0 13.0 13.0 13.0 15.0 15.0 15.0 15.0 15.0 18.5 18.5 24.0 24.0 24.0 24.0 24.0
9.5 9.5 9.5 9.5 10.0 10.0 10.5 11.0 12.0 12.5 12.0 13.0 13.0 13.5 14.0 18.0 20.0
5.0 5.0 5.0 5.0 5.5 5.5 5.5 5.5 6.0 6.5 5.0 7.0 5.5 6.5 7.0 9.0 10.0
11.5 11.5 11.5 11.5 11.5 13.0 13.0 13.0 13.0 13.0 16.5 16.5 21.5 21.5 21.5 21.5 21.5
13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 24.0 24.0 24.0 24.0 24.0 31.0
10.0 10.0 11.0 11.5 11.5 12.0 12.5 13.0 13.5 14.5 13.0 15.5 16.5 17.5 18.5 21.0
5.5 5.5 5.5 6.0 6.0 6.5 6.5 7.0 7.0 8.0 6.0 7.5 8.0 9.0 10.0 11.0
11.5 11.5 11.5 11.5 16.5 16.5 16.5 16.5 16.5 16.5 21.5 21.5 21.5 21.5 21.5 27.5
Sharma Film Capacitors
SAFETY RECOGNIZED FILM CAPACITOR
1. Rated Interference Suppression "X2" Metallized Polypropylene Composite dielectric. UL 1414 (250V AC), CUL 1414/Canda (250V VAC) VDE KEMA SEV NEMKO DEMKO SEMKO FIMKO CHINA: DIN EN 132400 (1994) / IEC60382-14 (1993) AND IEC DRAFT 40 (SEC)677 Ideal for using in Line-By-Pass, Antenna Coupling, Across-The-Line and Spark killer circuits and available for EMI filter and switching power supply and radio-and monitor, television application. Flame retardant plastic cases and epoxy resin. (compliance with 94V-0) Self-healing properties. Proven series wound construction. Approved By : UL, CSA, VDE, KEMA, SEV, NEMKO, DEMKO, SEMKO, FIMKO, CHINA.
V DE
MKTMPX SERIES
2.
3. 4. 5. 6.
CQC
SPECIFICATIONS :
OPERATING TEMPERATURE RATED VOLTAGE CAPACITANCE RANGE DIELECTRIC STRENGTH CAPACITANCE TOLERANCE INSULATION RESISTANCE -40 to +100 280VAC 0.0022 ~ 4.7uF Applied 1500VDC for 1minute or 2100VDC for 1 second. +-10% (K) Measured after a charging voltage 100 15VDC for 1 minute. LESS THAN OR EQUAL TO 0.33 F 30,000M GREATER THAN 0.33 F 10,000M F 0.1% MAX. at 1KHz 250 VAC: 120 V/microsecond.
W max T max
H max
25 2.0
dO
DISSIPATION FACTOR MAXIMUM PULSE RISE TIME
P0.5
(Unit : mm)
F SIZE 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.047 0.056 0.068 0.068 0.082 0.1 0.1 0.1 0.12 0.15 0.15 0.18 0.18 0.22
W 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 13.0 13.0 13.0 18.0 18.0 13.5 18.0 18.0 18.0 18.0 26.5 18.0 26.5 18.0
H 9.0 9.0 9.0 9.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 11.0 12.0 12.0 12.0 11.0 12.0 12.0 12.0 11.5 13.0 13.5 15.0 14.5 16.0 14.5
T 4.0 4.0 4.0 4.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 5.0 6.0 6.0 6.0 5.0 5.5 6.0 6.0 5.5 6.5 7.5 6.0 8.5 6.0 8.5
P 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 10.0 10.0 10.0 15.0 15.0 10.0 15.0 15.0 15.0 15.0 22.5 15.0 22.5 15.0
dO 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8
F
SIZE 0.22 0.27 0.33 0.33 0.33 0.39 0.47 0.47 0.47 0.47 0.47 0.56 0.68 0.68 0.82 0.82 1.0 1.0 1.0 1.5 1.5 1.8 2.0 2.0 2.2 2.2 2.5 3.0 3.3 4.0 4.7
W 26.5 26.5 18.0 26.5 26.5 26.5 17.5 18.0 26.5 26.5 32.0 32.0 26.5 32.0 32.0 26.5 32.0 32.0 37.0 32.0 37.0 37.0 31.0 38.0 31.0 38.0 38.0 38.0 38.8 48.0 48.0
H 16.5 16.5 14.5 16.5 17.0 20.0 19.0 16.0 17.0 20.0 20.0 20.0 20.0 20.0 22.0 20.0 20.0 22.0 25.0 22.0 26.5 29.0 31.0 28.0 31.0 29.0 30.0 30.0 31.3 30.0 30.0
T 7.0 8.5 8.5 7.0 8.5 10.0 11.0 10.0 8.5 10.0 11.0 11.0 10.0 11.0 13.0 10.0 11.0 13.0 13.5 13.0 17.0 19.0 22.0 18.0 22.0 19.0 20.0 20.0 21.7 30.0 30.0
P 22.5 22.5 15.0 22.5 22.5 22.5 15.0 15.0 22.5 22.5 27.5 27.5 22.5 27.5 27.5 22.5 27.5 27.5 31.5 27.5 31.5 31.5 27.5 31.5 27.5 31.5 31.5 31.5 31.5 41.5 41.5
dO 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8D
Dimension
Tolerance: +/- 0.5mm
Tel: (949)642-7324
SECI Engineers & Buyers' Guide
Fax: (949)642-7327

▲Up To Search▲

Price & Availability of MKT050102A101

	To Download MKT050102A101 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .